NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling 2x4 router table with a doubled plywood top, t-track slots for fences and featherboards, and a built-in safety switch.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg halves Dadoed 3/4in deep x 3in wide and paired so two boards form one solid 3x3in leg. | 8 | 1 1/2" × 3 1/2" × 35" | 2x4 | ☐ |
| Base side rails | 4 | 1 1/2" × 3 1/2" × 24" | 2x4 | ☐ |
| Base front/back rails | 4 | 1 1/2" × 3 1/2" × 36" | 2x4 | ☐ |
| Top panels Glued together into one doubled top with a laminate surface. | 2 | 3/4" × 24" × 36" | 3/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Construction lumber, 2x4, 8 ft | 8 each | ☐ |
| 3/4" plywood, 4x8 sheet Doubled for the top. | 1 each | ☐ |
| Router table insert plate | 1 each | ☐ |
| Universal t-track, 36" | 2 each | ☐ |
| Knobs and t-track bolts | 1 set | ☐ |
| Carriage bolts, 3/8" x 2" | 4 each | ☐ |
| Washers and wing nuts | 1 set | ☐ |
| Workbench casters | 4 each | ☐ |
| Safety switch | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.