NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A toy kitchen cabinet with an oven door, a divided storage bay, and a full plywood back wall that raises the whole play kitchen's visual height.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/4" × 20 1/4" | Pine | ☐ |
| Bottom shelf | 1 | 3/4" × 11 1/4" × 22 1/2" | Pine | ☐ |
| Top | 1 | 3/4" × 11 1/4" × 24" | Pine | ☐ |
| Apron/base trim | 2 | 3/4" × 2 1/2" × 22 1/2" | Pine | ☐ |
| Shelf | 1 | 3/4" × 11 1/4" × 10 1/4" | Pine | ☐ |
| Divider | 1 | 3/4" × 11 1/4" × 17" | Pine | ☐ |
| Oven door | 1 | 3/4" × 11 1/4" × 14 1/4" | Pine | ☐ |
| Back wall panel | 1 | 3/4" × 24" × 48" | Project panel | ☐ |
| Back wall shelves | 2 | 3/4" × 2 1/2" × 24" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x12, 12 ft total | 12 ft | ☐ |
| Pine, 1x3, 8 ft | 1 each | ☐ |
| Project panel, 3/4", 24" x 48" | 1 each | ☐ |
| Oven knob | 1 each | ☐ |
| Oven door handle | 1 each | ☐ |
| Hinges | 1 pair | ☐ |
| Magnetic door catch | 1 each | ☐ |
| Self-tapping wood screws, 2" Or 1-1/4" pocket hole screws / 2" brad nails, depending on your tools. | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig. Materials: Pine, 1x12, 12 ft total
Build the box from the 1x12 sides, bottom shelf, and top using a pocket hole jig (3/4" setting, 1-1/4" pocket hole screws), 2" screws, or 2" brad nails and wood glue — whichever fastener you have on hand.
Tools: Drill / Driver. Materials: Pine, 1x3, 8 ft
Attach the apron trim to the front of the project with finish nails or pocket hole screws.
Tools: Drill / Driver. Materials: Pine, 1x12, 12 ft total
Add the divider and shelf using the same fastening method as the rest of the box.
Tools: Drill / Driver. Materials: Oven knob, Oven door handle, Hinges, Magnetic door catch
Hinge the door into the opening, checking for an even gap on all four sides before committing — a slightly proud edge is the most noticeable flaw on a build like this. Add the magnetic clasp, knob, and handle once you're happy with the fit.
Tools: Drill / Driver. Materials: Project panel, 3/4", 24" x 48"
Attach the back wall panel and its shelves with screws from the back side and wood glue.