DIY Play Kitchen with Back Wall

Build the box from the 1x12 sides, bottom shelf, and top using a pocket hole jig (3/4" setting, 1-1/4" pocket hole screws), 2" screws, or 2" brad nails and wood glue — whichever fastener you have on hand.

Attach the apron trim to the front of the project with finish nails or pocket hole screws.

Add the divider and shelf using the same fastening method as the rest of the box.

Hinge the door into the opening, checking for an even gap on all four sides before committing — a slightly proud edge is the most noticeable flaw on a build like this. Add the magnetic clasp, knob, and handle once you're happy with the fit.

Attach the back wall panel and its shelves with screws from the back side and wood glue.