NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
This DIY Dog Crate Console is the perfect combination of form and function.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Boards | 8 | 2" × 4" × 8" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x4 96" | 8 board | ☐ |
| Board, 2x2 96" | 3 board | ☐ |
| Board, 1x4 96" | 1 board | ☐ |
| 1 1/4" pocket hole screws | 50 each | ☐ |
| 2 1/2" pocket hole screws | 50 each | ☐ |
| 3/4" staples | 50 each | ☐ |
| 1" pin nails | 25 each | ☐ |
| 1 3/4" wood screws | 10 each | ☐ |
| Roll of black PVC coated welded wire | 1 each | ☐ |
| 22" drawer slides | 6 each | ☐ |
| Hinges | 4 each | ☐ |
| Latches | 2 each | ☐ |
| Dog bowls | 2 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.