Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Craftsman Toy Box Bench
Craftsman style bench that doubles as a toy box.
- Difficulty
- Expert
- Time
- 7.8–15.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Box Front | 1 | 3/4" × 17" × 48" | — | ☐ |
| Box Back | 1 | 3/4" × 17" × 48" | — | ☐ |
| Box Bottom | 1 | 3/4" × 14" × 48" | — | ☐ |
| Box Top | 1 | 3/4" × 17" × 46" | — | ☐ |
| Box Side | 2 | 3/4" × 16" × 17" | — | ☐ |
| Long Slat | 4 | 3/4" × 2" × 46" | — | ☐ |
| Back Leg | 2 | 3/4" × 2" × 34" | — | ☐ |
| Front Trim | 2 | 3/4" × 2" × 12" | — | ☐ |
| Front Leg | 2 | 3/4" × 2" × 23" | — | ☐ |
| Side Rail | 6 | 3/4" × 2" × 16" | — | ☐ |
| Arm Rest | 2 | 3/4" × 2" × 17" | — | ☐ |
| Back Slat Wide | 2 | 3/4" × 5" × 13" | — | ☐ |
| Side Trim | 2 | 3/4" × 5" × 12" | — | ☐ |
| Arm Trim | 2 | 3/4" × 5" × 5" | — | ☐ |
| Back Slat Thin | 9 | 3/4" × 1" × 13" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Board, 1x3 96" | 5 board | ☐ |
| Board, 1x6 72" | 1 board | ☐ |
| Board, 1x2 96" | 2 board | ☐ |
| 1 1/4" pocket hole screw | 100 each | ☐ |
| Full overlay frameless euro hinges | 2 each | ☐ |
| Wood glue | 1 each | ☐ |
| Briar Smoke Stain | 1 each | ☐ |
| Satin Polyurethane | 1 each | ☐ |
| Sandpaper (80, 120, 220) | 3 each | ☐ |
| 1 1/4" brad nails | 20 each | ☐ |
| Wood Putty | 1 each | ☐ |
| 46 1/2" Plywood Edge Banding | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.