NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A simplified square-cornered base cabinet for a kitchen's inside corner, built from a single sheet of plywood with careful layout.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top and bottom Back corner notched with a jigsaw to fit the back supports. | 2 | 3/4" × 34 3/4" × 34 3/4" | Plywood, 3/4", finished, 4x8 sheet | ☐ |
| Sides | 2 | 3/4" × 22 1/4" × 34 1/2" | Plywood, 3/4", finished, 4x8 sheet | ☐ |
| Back supports 1x4 boards also work. | 2 | 3/4" × 3 1/2" × 34 5/16" | Plywood scrap, 3/4" | ☐ |
| Bottom support | 1 | 3/4" × 5" × 15" | Plywood scrap, 3/4" | ☐ |
| Support-support | 1 | 3/4" × 5" × 34 3/4" | Plywood scrap, 3/4" | ☐ |
| Back panels | 2 | 1/4" × 34 1/2" × 35 1/2" | Plywood, 1/4", 4x8 sheet | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 27" | Poplar or hardwood | ☐ |
| Face frame rails Two at 13-1/2", two at 12-3/4". | 4 | 3/4" × 1 1/2" × 13 1/4" | Poplar or hardwood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", finished, 4x8 sheet Every carcass part comes from this one sheet — plan your cut layout before you start. | 1 each | ☐ |
| Plywood, 1/4", 4x8 sheet Back panels. | 1 each | ☐ |
| Plywood scrap, 3/4" Support pieces. | 1 each | ☐ |
| Poplar or hardwood, 1x2, 10 ft Face frame — matched to your door species. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Finish nails, 3/4" | 1 box | ☐ |
| Cabinet door, full overlay | 1 each | ☐ |
| Concealed overlay hinges, 1-1/4" | 1 pair | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.