NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A full-height closet tower cut entirely from a single sheet of 3/4" plywood. Straight cuts, screw joinery, and a wall cleat to anchor it.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 15 7/8" × 80" | 3/4" plywood | ☐ |
| Shelves | 7 | 3/4" × 15 7/8" × 15 3/4" | 3/4" plywood | ☐ |
| Wall cleats | 5 | 3/4" × 15 7/8" × 3" | 3/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Ripped into three 15-7/8"-wide x 8 ft strips. | 1 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Closet rod sockets | 4 each | ☐ |
| Closet rods, cut to closet width | 4 each | ☐ |
| Wood trim screws, 2" | 30 each | ☐ |
| Wood screws, 3" Anchoring the cleat to wall studs. | 12 each | ☐ |
| Shelf pins Optional, for adjustable shelves. | 8 each | ☐ |
| Edge banding, 3/4" Optional front-edge finish. | 20 foot | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.