NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small shallow tray-box on little feet for serving cookies or displaying holiday treats. Made from furring strips and a plywood bottom in an afternoon.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame sides | 4 | 3/4" × 2 1/2" × 10 1/2" | 1x3 | ☐ |
| Frame end | 1 | 3/4" × 2 1/2" × 15" | 1x3 | ☐ |
| Back board | 1 | 3/4" × 5 1/2" × 15" | 1x4 or 1x6 | ☐ |
| Bottom | 1 | 1/4" × 12" × 15" | 1/4" plywood | ☐ |
| Feet Cut off the end of a 16"+ piece — do not cut tiny pieces at the saw. | 4 | 1 1/2" × 1 1/2" × 1 1/2" | 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x3, 5 board feet (Pine) Frame. Furring strips are fine. | 5 foot | ☐ |
| 1x4 or 1x6, 15" (Pine) Back board for lettering. | 1 each | ☐ |
| Plywood, 1/4", 12" x 15" Bottom. | 1 each | ☐ |
| 2x2 scrap, 16"+ Feet — cut from a long piece, never a tiny offcut. | 1 each | ☐ |
| Brad nails, 3/4" and 1-1/4" | 40 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Paint | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.