NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A scaled-down Adirondack chair with surfboard-shaped arms — the same angled stringers that define a full-size Adirondack, cut for a kid's frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Stringers All angles are 15° off square — mark and cut both together so they match exactly. | 2 | 3/4" × 3 1/2" × 17 3/4" | Pine | ☐ |
| Front apron | 1 | 3/4" × 3 1/2" × 15" | Pine | ☐ |
| Front seat slat | 1 | 3/4" × 2 1/2" × 15" | Pine | ☐ |
| Main seat slats Leave 1/4" gaps between slats. | 5 | 3/4" × 1 1/2" × 15" | Pine | ☐ |
| Front legs | 2 | 3/4" × 2 1/2" × 11" | Pine | ☐ |
| Seat back, middle | 1 | 3/4" × 7 1/4" × 26 3/4" | Pine | ☐ |
| Seat back, sides | 2 | 3/4" × 2 1/2" × 24" | Pine | ☐ |
| Top seat back support | 1 | 3/4" × 1 1/2" × 13 1/2" | Pine | ☐ |
| Middle seat back support | 1 | 3/4" × 1 1/2" × 16 1/2" | Pine | ☐ |
| Bottom seat back support | 1 | 3/4" × 3 1/2" × 13 1/2" | Pine | ☐ |
| Arm supports | 2 | 3/4" × 1 1/2" × 13 5/8" | Pine | ☐ |
| Arm rests (surfboard shaped) Shape and round with a jigsaw for the surfboard look. | 2 | 3/4" × 2 1/2" × 14 7/8" | Pine | ☐ |
| Decorative arm supports | 2 | 3/4" × 1 1/2" × 4 1/2" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x4, 8 ft | 1 each | ☐ |
| Pine, 1x8, 3 ft | 1 each | ☐ |
| Pine, 1x3, 8 ft | 2 each | ☐ |
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Wood screws, 1-1/4", 2", and 3" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
| Sandpaper, assorted grit | 3 sheet | ☐ |
| Exterior finish or paint | 1 quart | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.