NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A scrap-wood grazing board built from angled offcuts framed in 1x2 — a genuinely good use for the odd short pieces left over from other projects.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Field pieces Both ends cut parallel at 30° off square; long point to short point equals the board's finished depth (16" shown as an example). | 12 | 3/4" × 3" × 16" | Scrap 1x/2x lumber | ☐ |
| Divider strips Stood upright against the saw fence to match the field pieces' angle. | 4 | 3/4" × 1 1/2" × 16" | Pine 1x2 | ☐ |
| End frame pieces Cut a little long, then trimmed flush after assembly. | 2 | 3/4" × 1 1/2" × 20" | Pine 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Scrap 1x and 2x lumber Odds and ends left over from other projects; free if already on hand. | 6 ft | ☐ |
| Pine, 1x2, scraps Frames the outside edge of the board. | 4 ft | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
| Wood stain | 1 can | ☐ |
| Food-safe polyurethane Protects the board and makes it safe to wipe clean after serving food. | 1 can | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.