NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small box stand built from an inner 1x2 frame skinned in cedar fence picket, with cut-out carry handles on the shorter sides for moving a full beverage dispenser.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Corner supports | 4 | 3/4" × 1 1/2" × 5 1/2" | 1x2, 4 ft | ☐ |
| Bottom supports | 2 | 3/4" × 1 1/2" × 17 1/2" | 1x2, 4 ft | ☐ |
| Sides with handles | 4 | 5/8" × 3 1/2" × 13" | Cedar fence picket, 6 ft, 3-1/2 in wide | ☐ |
| Longer sides, no handles | 4 | 5/8" × 3 1/2" × 17 1/2" | Cedar fence picket, 6 ft, 3-1/2 in wide | ☐ |
| Bottom boards | 5 | 5/8" × 3 1/2" × 11 3/4" | Cedar fence picket, 6 ft, 3-1/2 in wide | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x2, 4 ft | 1 each | ☐ |
| Cedar fence picket, 6 ft, 3-1/2 in wide | 3 each | ☐ |
| Brad nails or staples, 1 in | 40 each | ☐ |
| Wood glue, exterior rated | 3 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver. Materials: 1x2, 4 ft, Wood glue, exterior rated
Build the inner 1x2 frame from the corner supports and bottom supports. Build two identical frames.
Tools: Brad Nailer. Materials: Cedar fence picket, 6 ft, 3-1/2 in wide, Brad nails or staples, 1 in, Wood glue, exterior rated
Add the side panel pieces to the outsides of the 1x2 frames.
Tools: Brad Nailer. Materials: Cedar fence picket, 6 ft, 3-1/2 in wide, Brad nails or staples, 1 in, Wood glue, exterior rated
Add the end pieces with handles to the two side pieces.
Tools: Brad Nailer, Drill / Driver, Jigsaw. Materials: Cedar fence picket, 6 ft, 3-1/2 in wide, Brad nails or staples, 1 in, Wood glue, exterior rated
Attach the bottom boards. Drill out handle starter holes and cut with a jigsaw, or add hardware handles instead.