NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small 1x12 bookcase with a header cap and footer trim, finished on bun feet — a matched-collection piece built to the same footprint as this catalog's separate console table.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 11 1/4" × 45 1/2" | 1x12, 8 ft | ☐ |
| Top | 1 | 3/4" × 11 1/4" × 27 1/4" | 1x12, 10 ft | ☐ |
| Shelves | 3 | 3/4" × 11 1/4" × 25 3/4" | 1x12, 10 ft | ☐ |
| Header | 1 | 3/4" × 2 1/2" × 25 3/4" | 1x3, 8 ft | ☐ |
| Back panel | 1 | 1/4" × 27 1/4" × 46 1/4" | 1/4" plywood, panel for back | ☐ |
| Side footer | 2 | 3/4" × 1 1/2" × 11 1/2" | 1x2, 8 ft | ☐ |
| Front footer | 1 | 3/4" × 1 1/2" × 28 3/4" | 1x2, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 8 ft | 1 each | ☐ |
| 1x12, 10 ft | 1 each | ☐ |
| 1/4" plywood, panel for back | 1 each | ☐ |
| 1x2, 8 ft | 1 each | ☐ |
| 1x3, 8 ft | 1 each | ☐ |
| Bun feet | 4 each | ☐ |
| Wood screws, 2" | 20 each | ☐ |
| Brad nails, 1-1/4" | 30 each | ☐ |
| Wood glue | 3 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver. Materials: 1x12, 8 ft, 1x12, 10 ft, Wood screws, 2", Wood glue
Screw the sides, top, and shelves together, leaving a 3/4" gap under the bottom shelf. Use 2" screws and glue, checking for square.
Tools: Drill / Driver. Materials: 1x12, 10 ft, Wood screws, 2"
Either drill holes for shelf pins to create removable shelves, or fasten shelves permanently in place with 2" screws and glue.
Tools: Drill / Driver. Materials: 1x3, 8 ft, Wood screws, 2", Wood glue
Attach the header piece across the top front with screws and glue.
Tools: Brad Nailer. Materials: 1/4" plywood, panel for back, Brad nails, 1-1/4", Wood glue
Attach the back with glue, checking for square. If shelves are fixed, also fasten the back to the shelves.
Tools: Brad Nailer. Materials: 1x2, 8 ft, Brad nails, 1-1/4", Wood glue
Attach the side footer trim to the bottoms of the bookcase, tucking into the gap left under the bottom shelf, with 1-1/4" nails and glue.
Tools: Drill / Driver, Random Orbit Sander. Materials: Bun feet, Primer and paint, or stain and poly
Attach the bun feet as directed by the manufacturer. Sand all surfaces and apply primer and paint, or stain and poly.