NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small carry basket shaped like a bunny's face and ears, sized for an Easter-basket haul of eggs and candy.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bunny face panel Trace a symmetrical bunny-face-and-ears pattern before cutting. | 1 | 1/2" × 8" × 14 1/2" | 1/2" plywood | ☐ |
| Back panel | 1 | 1/2" × 8" × 9" | 1/2" plywood | ☐ |
| Sides | 2 | 3/4" × 5 1/2" × 14" | Fence picket | ☐ |
| Bottom Cut to fit the assembled basket's footprint. | 1 | 1/4" × 8" × 15" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1/2" plywood scrap Bunny face and back panels. | 1 each | ☐ |
| 1x6 boards or fence pickets About 28" total used, for the sides and handle. | 3 linear ft | ☐ |
| 1/4" plywood scrap Bottom panel. | 1 each | ☐ |
| 1-1/4" staples Nails work as a substitute. | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
| Wood stain | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Jigsaw, Pencil. Materials: 1/2" plywood scrap
Fold a paper pattern in half and trace it so the bunny face and ears come out symmetrical, then transfer the pattern to the 1/2" plywood and cut both the face and back panels with a jigsaw.
Tools: Staple Gun. Materials: 1x6 boards or fence pickets
Glue and staple the two side pieces to the face and back panels, forming the basket's box shape.
Tools: Staple Gun. Materials: 1/4" plywood scrap
Cut the bottom to fit and glue and staple it to the sides and front. Add a handle across the top — a strip of the same fence-picket material, or a length of scrap, works well.
Materials: Wood stain
Sand any rough edges, especially anywhere little hands will grip, then stain or paint.