NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-anchored 2x4 daybed platform that doubles as a sofa — the frame ties into the studs so it can't tip or walk. Ideal for a nook or tiny house.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg uprights | 3 | 1 1/2" × 3 1/2" × 37 3/4" | 2x4 | ☐ |
| Leg feet | 3 | 1 1/2" × 3 1/2" × 10 1/2" | 2x4 | ☐ |
| Leg braces | 3 | 3/4" × 1 1/2" × 14" | 1x2 | ☐ |
| Slats / cleats One serves as the wall back cleat; the rest are platform slats. | 7 | 1 1/2" × 3 1/2" × 75" | 2x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft (SPF / Pine) Legs, cleats, and slats. Stud-length is fine. | 9 each | ☐ |
| 1x2, 4 ft (Pine) | 1 each | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Wall screws, 2-1/2" or longer Length depends on your wall material — must bite solidly into studs. | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Finish | 1 kit | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Pocket Hole Jig, Speed Square. Materials: 2x4, 8 ft, 1x2, 4 ft, Pocket hole screws, 2-1/2"
Build three legs for a 75"-wide daybed. If you're spanning a longer distance, add a leg about every 3 feet so the 2x4 slats don't sag under weight. Assemble with pocket screws.
Tools: Drill / Driver, Level, Tape Measure. Materials: 2x4, 8 ft, Pocket hole screws, 2-1/2", Wall screws, 2-1/2" or longer
Attach the back cleat to the wall studs with 2-1/2" (or longer) screws, level. Then attach the legs to the back cleat with pocket screws. At least one outer leg — preferably both — must be fastened to wall studs or a solid built-in. This wall connection is what keeps the daybed from tipping or sliding; do not skip it.
Tools: Brad Nailer, Drill / Driver, Random Orbit Sander. Materials: 2x4, 8 ft, Wall screws, 2-1/2" or longer, Finish
Attach the 2x4 slats across the legs with 2-1/2" screws. Space them evenly to support the mattress.
The exposed leg ends can be wrapped in plywood or planking for a finished sofa look. Sand and finish as desired.