NotchBookcase with Toy Storage
Step-by-step build — 5 steps. Also available as a print sheet.
1Cut Sides and Mid Panel
Use the diagrams shown to draw two sides and one middle panel. Then cut out using a circular saw and jig saw.
2Assembly
Drill pocket holes and begin assembly as shown using 1-1/4" pocket screws.
3Assembly
Drill pocket holes and continue assembly as shown using 1-1/4” pocket screws.
4Assemble Shelf
Drill pocket holes and assemble shelf as shown using 1-1/4” pocket screws.
5Install Shelf and Trim
Install shelf as shown using 1-1/4” pocket screws. Cut base board trim and decorative moulding to length and install using 1-1/4” brad nails. For more plans like this be sure to visit RogueEngineer.com
