Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Board and Batten Media Console

A media console with two drawers and two board-and-batten doors on 2x2 legs. Cottage styling over honest 1x12 casework.

Cut list

Part	Qty	T × W × L	Material	✓
Sides	2	3/4" × 11 1/4" × 19 1/2"	1x12	☐
Side trim Cut to the width of your 1x12.	4	3/4" × 1 1/2" × 11 1/2"	1x2	☐
Top	1	3/4" × 11 1/4" × 57 1/2"	1x12	☐
Center partitions	2	3/4" × 11 1/4" × 18 3/4"	1x12	☐
Box bottom	1	3/4" × 11 1/4" × 54 1/2"	1x12	☐
Legs	4	1 1/2" × 1 1/2" × 23 1/4"	2x2	☐
Front/back trim	4	1 1/2" × 1 1/2" × 54 1/2"	2x2	☐
Top trim back	1	3/4" × 1 1/2" × 57 1/2"	1x2	☐
Top trim front	1	3/4" × 2 1/2" × 57 1/2"	1x3	☐
Drawer/door trim	4	1 1/2" × 1 1/2" × 16 1/2"	2x2	☐
Drawer front/back	4	3/4" × 7 1/4" × 20 1/4"	1x8	☐
Drawer sides Cut to the width of your 1x12.	4	3/4" × 7 1/4" × 11 1/2"	1x8	☐
Drawer bottoms	2	3/4" × 11 1/4" × 18 3/4"	1x12	☐
Door rails	4	3/4" × 2 1/2" × 15 3/8"	1x3	☐
Door battens / stiles	6	3/4" × 1 1/2" × 11 3/8"	1x2	☐
Door backs	2	1/4" × 15 3/8" × 16 1/4"	1/4" plywood	☐

Item	Qty	✓
1x12, 8 ft (Pine) Box, top, partitions, drawer bottoms.	3 each	☐
2x2, 8 ft (Pine) Legs, front/back trim, drawer/door trim, drawer guides.	5 each	☐
1x3, 8 ft (Pine) Top front trim, door rails.	2 each	☐
1x2, 8 ft (Pine) Side trim, door battens, drawer guides.	2 each	☐
1x8, 12 ft (Pine) Drawer boxes.	1 each	☐
1/4" plywood Door backs and optional console back.	1 sheet	☐
Wood screws, 2-1/2" Or pocket hole screws.	1 box	☐
Brad nails, 1-1/4"	1 box	☐
Wood glue	10 oz	☐
Knobs or handles	4 each	☐
Finish / paint and primer	1 kit	☐

Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.