Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

42" Blind Corner Base Cabinet

A fitted kitchen base cabinet built to turn a corner, from the same carcass system as a full run of matching cabinets.

Cut list

Part	Qty	T × W × L	Material	✓
Side panels Same dimension on ALL base cabinets in the run — cut these first and match your other cabinets exactly.	2	3/4" × 22 1/4" × 34 1/2"	Plywood	☐
Bottom shelf	1	3/4" × 22 1/4" × 40"	Plywood	☐
Bottom supports	2	3/4" × 5" × 40"	Plywood, cheaper grade	☐
Top supports Rip width can vary — length is what matters.	2	3/4" × 3 1/2" × 40"	Plywood	☐
Back	1	1/4" × 32" × 41 1/2"	Plywood	☐
Face frame side stiles Same on ALL base cabinets in the run.	2	3/4" × 1 1/2" × 27"	Pine	☐
Face frame center stile	1	3/4" × 5 1/2" × 27"	Pine	☐
Face frame top/bottom rails Always the overall width of the cabinet.	2	3/4" × 1 1/2" × 42"	Pine	☐
Face frame drawer/door rail	1	3/4" × 1 1/2" × 18"	Pine	☐
Shelf Measure and adjust to fit your shelf pins.	1	3/4" × 22" × 39 3/4"	Plywood	☐

Item	Qty	✓
Plywood, 3/4", 4x8 sheet Sides, bottom shelf, and top supports.	1 each	☐
Plywood, 3/4", cheaper grade, 4x8 sheet Bottom supports — hidden underneath the cabinet, no need for finished-face material.	1 each	☐
Plywood, 1/4", 4x8 sheet Back panel.	1 each	☐
Pine, 1x2, 8 ft Face frame stiles and rails.	2 each	☐
Pine, 1x6, 6 ft Center stile.	1 each	☐
Pocket hole screws, 1-1/4"	1 box	☐
Finish nails, 3/4"	1 box	☐
Edge banding Finishes the plywood shelf fronts.	1 roll	☐
Concealed overlay hinges, 1-1/4"	1 pair	☐
Door and drawer face Ordered pre-made to size in the source build, or build your own from the stated dimensions.	1 set	☐

Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.