NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted shelf that cradles a bike by its top tube and gives you a spot for a helmet and keys. Built from a 1x10 and a 1x4 offcut.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Back | 1 | 3/4" × 9 1/4" × 12" | 1x10 | ☐ |
| Bottom shelf | 1 | 3/4" × 9 1/4" × 10 1/2" | 1x10 | ☐ |
| Sides Top-tube notch cut into these. | 2 | 3/4" × 3 1/2" × 10" | 1x4 | ☐ |
| Front | 1 | 3/4" × 3 1/2" × 12" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x10, 2 ft Back and bottom shelf. | 1 each | ☐ |
| 1x4, 3 ft Sides and front. | 1 each | ☐ |
| Self-tapping wood screws, 2 in Star-drive trim screws work well. | 1 box | ☐ |
| Wood screws, 3 in For mounting into a wall stud. At least two. | 2 each | ☐ |
| Wood glue | 1 bottle | ☐ |
| Handle and hooks For helmet, keys, gloves. | 1 set | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.