NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-hung bean bag toss board with a baseball-diamond hole pattern, mounted on a french cleat built from layered 1x4s.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Frame sides | 4 | 3/4" × 3 1/2" × 22 1/2" | Pine 1x4 | ☐ |
| Frame top/bottom | 2 | 3/4" × 3 1/2" × 38" | Pine 1x4 | ☐ |
| Back support | 1 | 3/4" × 1 1/2" × 22 1/2" | Pine 1x2 | ☐ |
| Front bottom A 1x3 also works here. | 1 | 3/4" × 1 1/2" × 24" | Pine 1x2 | ☐ |
| Playing surface | 1 | 1/4" × 24" × 32" | 1/4" plywood, 24 in x 48 in | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x4, 8 ft | 2 each | ☐ |
| Pine, 1x2, 4 ft | 1 each | ☐ |
| 1/4" plywood, 24 in x 48 in | 1 each | ☐ |
| 1-1/4" and 3/4" brad nails | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Brad Nailer. Materials: Pine, 1x4, 8 ft, 1-1/4" and 3/4" brad nails, Wood glue
Build the basic frame of the project using 1-1/4" brad nails and glue.
Tools: Brad Nailer. Materials: Pine, 1x2, 4 ft, 1-1/4" and 3/4" brad nails, Wood glue
Attach the back support to the top of the frame with 1-1/4" brad nails and wood glue.
Tools: Brad Nailer. Materials: Pine, 1x2, 4 ft, 1-1/4" and 3/4" brad nails, Wood glue
Attach the front bottom piece with 1-1/4" brad nails and wood glue.
Tools: Brad Nailer, Hole Saw Kit, Random Orbit Sander. Materials: 1/4" plywood, 24 in x 48 in, 1-1/4" and 3/4" brad nails, Wood glue
Attach the 1/4" plywood to the front of the frame with 3/4" brad nails and glue. Mark out the baseball-diamond hole pattern and drill the holes with a 4" hole saw. Sand any rough edges smooth.
Tools: Brad Nailer, Drill / Driver. Materials: Pine, 1x4, 8 ft, 1-1/4" and 3/4" brad nails, Wood glue
Layer the 1x4s over each other and nail and glue together to build a french cleat. Make sure the cleat fits inside the back of the project and hooks around the 1x2 at the top. Trim the ends if necessary, then hang the cleat on the wall in the desired location and hang the game on it.