NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Two simple 1x8 towers bridge a top board over a bathroom vanity, hiding recessed light wiring inside — sized entirely around YOUR vanity, ceiling height, and light placement, not a fixed dimension.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tower sides Adjust to fit your own ceiling height, vanity light placement, and available room above the vanity. | 5 | 3/4" × 7 1/4" × 48" | 1x8 | ☐ |
| Tower shelves/braces | 8 | 3/4" × 7 1/4" × 10 1/2" | 1x8 | ☐ |
| Light board Sized to a standard 48"-wide vanity — adjust to yours. | 1 | 3/4" × 9 1/4" × 48" | 1x10 | ☐ |
| Light board returns Cut to fit. | 2 | 3/4" × 9 1/4" × 6 1/2" | 1x10 | ☐ |
| Corner trim A second piece is needed if the vanity sits in a corner. | 1 | 3/4" × 2 1/2" × 7 1/4" | 1x3 | ☐ |
| Front trim 48-3/4" for a standard install, 49-1/2" if the vanity is in a corner. | 1 | 3/4" × 2 1/2" × 48 3/4" | 1x3 | ☐ |
| Base moulding Cut to fit around the base of the hutch. | 1 | 1/2" × 4 1/4" × 72" | Base moulding | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x8, 8 ft (primed MDF works well) | 6 each | ☐ |
| 1x10, 6 ft (primed MDF works well) | 1 each | ☐ |
| 1x3, 6 ft | 1 each | ☐ |
| Base moulding, 4-1/4", 6 ft | 1 each | ☐ |
| Crown moulding, cut to fit the room Finishes the top joint around the whole room, not just the hutch. | 20 ft | ☐ |
| Recessed cabinet lights | 4 each | ☐ |
| Finish nails, 1-1/4" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.