Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Bailey Console Table with Drawers

A two-drawer console with plywood side panels on 2x2 legs, topped with a breadboard-end plank top. (Source titles it 'with Doors,' but the plan builds drawers.)

Difficulty: Advanced
Time: 7–11 hrs
Cost: $$$

Cut list

Part	Qty	T × W × L	Material	✓
Legs	4	1 1/2" × 1 1/2" × 29 1/4"	2x2	☐
Below-drawer supports	2	1 1/2" × 1 1/2" × 48 1/4"	2x2	☐
Above-drawer supports	2	3/4" × 1 1/2" × 48 1/4"	1x2	☐
Between-drawer supports	2	3/4" × 1 1/2" × 11 1/2"	1x2	☐
Side panels	2	3/4" × 13" × 13 3/4"	3/4" plywood	☐
Back stretcher	1	3/4" × 2 1/2" × 48 1/4"	1x3	☐
Side stretchers	2	3/4" × 2 1/2" × 13"	1x3	☐
Back panel	1	1/4" × 13 3/4" × 50 1/4"	1/4" plywood	☐
Drawer fronts/backs	4	3/4" × 7 1/4" × 21 1/4"	1x8	☐
Drawer sides	4	3/4" × 7 1/4" × 14 1/2"	1x8	☐
Drawer bottoms	2	1/4" × 14 1/2" × 22 3/4"	1/4" plywood	☐
Drawer faces	2	3/4" × 11 1/4" × 23 1/2"	1x12	☐
Tabletop boards	3	3/4" × 5 1/2" × 47 7/8"	1x6	☐
Breadboard ends	2	3/4" × 2 1/2" × 16 1/2"	1x3	☐

Materials

Item	Qty	✓
2x2, 8 ft (Whitewood) Legs and drawer supports.	3 each	☐
1x2, 8 ft (Pine) Drawer supports.	4 each	☐
1x6, 12 ft (Pine) Tabletop boards.	1 each	☐
1x12, 4 ft (Pine) Drawer faces.	1 each	☐
Plywood, 3/4", 24" x 48" panel Side panels; planked 1x also works.	1 each	☐
Plywood, 1/4", full sheet Back and drawer bottoms.	1 each	☐
1x8, 12 ft (Pine) Drawer boxes.	1 each	☐
1x3, 6 ft (Pine) Stretchers and breadboard ends.	1 each	☐
Knobs	4 each	☐
Euro drawer slides, 14" (sets)	2 each	☐
Pocket-hole screws, 1-1/4" and 2-1/2"	60 each	☐
Brad nails, 3/4" and 1-1/4"	60 each	☐
Wood glue	8 oz	☐

Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.