NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A two-shelf changing table on 2x2 legs with two built-in drawers below and a raised-edge topper on top to keep a changing pad from sliding off.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 1 1/2" × 32" | Pine 2x2 | ☐ |
| Side trim | 4 | 3/4" × 1 1/2" × 14 1/2" | Pine 1x2 | ☐ |
| Front and back trim | 4 | 3/4" × 1 1/2" × 38" | Pine 1x2 | ☐ |
| Shelves | 2 | 3/4" × 14 1/2" × 38" | 3/4" plywood or MDF, half sheet | ☐ |
| Sides (aprons) | 2 | 3/4" × 5 1/2" × 14 1/2" | Pine 1x6 | ☐ |
| Back (apron) | 1 | 3/4" × 5 1/2" × 38" | Pine 1x6 | ☐ |
| Top | 1 | 3/4" × 17 1/2" × 41" | 3/4" plywood or MDF, half sheet | ☐ |
| Drawer area trim, long | 2 | 3/4" × 1 1/2" × 38" | Pine 1x2 | ☐ |
| Drawer area trim, short | 6 | 3/4" × 1 1/2" × 4 3/4" | Pine 1x2 | ☐ |
| Drawer sides | 4 | 3/4" × 3 1/2" × 15 1/2" | Pine 1x4 | ☐ |
| Drawer front/back | 4 | 3/4" × 3 1/2" × 15 3/8" | Pine 1x4 | ☐ |
| Drawer bottoms | 2 | 1/4" × 15 1/2" × 16 7/8" | 1/4" plywood, at least 16" x 35" | ☐ |
| Drawer faces | 2 | 3/4" × 4 1/2" × 17 5/8" | Pine 1x6 | ☐ |
| Topper long sides | 2 | 3/4" × 2 1/2" × 41" | Pine 1x3 | ☐ |
| Topper ends | 3 | 3/4" × 2 1/2" × 16" | Pine 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood or MDF, half sheet | 1 each | ☐ |
| Pine, 2x2, 8 ft | 2 each | ☐ |
| Pine, 1x2, 8 ft | 3 each | ☐ |
| Pine, 1x6, 10 ft | 1 each | ☐ |
| Pine, 1x4, 12 ft | 1 each | ☐ |
| 1/4" plywood, at least 16" x 35" | 1 each | ☐ |
| Pine, 1x3, 8 ft For the topper. | 2 each | ☐ |
| 1-1/4" pocket hole screws | 1 box | ☐ |
| 14" drawer slides, set | 2 set | ☐ |
| 1-1/4" and 3/4" brad nails | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
| Drawer knobs or handles | 2 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.