NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A very strong and easy to make assembly table that can easily be modified to fit yours needs.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Apron front and back | 4 | 2" × 4" × 47" | — | ☐ |
| Apron Sides | 4 | 2" × 4" × 20" | — | ☐ |
| Legs | 4 | 4" × 4" × 29" | — | ☐ |
| Table Top | 2 | 3/4" × 24" × 48" | — | ☐ |
| Base Deck | 1 | 3/4" × 23" × 47" | — | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x4 96" | 4 board | ☐ |
| Board, 4x4 96" | 2 board | ☐ |
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| 3" Screws | 80 each | ☐ |
| 1 5/8" screws | 12 each | ☐ |
| 3" Locking Casters | 4 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Take two pieces of plywood 48"x24"x3/4" and glued them together.
Cut 4 - 4x4 to 29 1/2"
4 - 2x4x47 4 - 2x4x20 Creat two Apron frames
The legs and aprons are put together with glue and screws
Cut the base deck to fit on the bottom aprons
slide the base deck in from the side at and angle, then rotate into place.
Place Casters on each corner
Set table top in place centered on the frame. Predrill and countersink the screws into the frame.