NotchAssembly Table
Step-by-step build — 8 steps. Also available as a print sheet.
1Table top
Take two pieces of plywood 48"x24"x3/4" and glued them together.
2Legs
Cut 4 - 4x4 to 29 1/2"
3Aprons
4 - 2x4x47 4 - 2x4x20 Creat two Apron frames
4Assembly
The legs and aprons are put together with glue and screws
5Base deck
Cut the base deck to fit on the bottom aprons
6Assembly
slide the base deck in from the side at and angle, then rotate into place.
7Casters
Place Casters on each corner
8Table Top
Set table top in place centered on the frame. Predrill and countersink the screws into the frame.
