NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A tall plywood armoire with a mirrored door on one side, an open shelved compartment on the other, and four drawers below — built entirely with pocket-hole plywood casework.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides | 2 | 3/4" × 15 3/4" × 67" | 3/4" plywood, ripped 15-3/4" strips, 8 ft (2 sheets) | ☐ |
| Side trim, top and bottom | 4 | 3/4" × 2 1/2" × 15 3/4" | Pine 1x3 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 69" | Pine 2x2 | ☐ |
| Top supports | 2 | 1 1/2" × 1 1/2" × 44" | Pine 2x2 | ☐ |
| Bottom shelf | 1 | 3/4" × 15 3/4" × 44" | 3/4" plywood, ripped 15-3/4" strips, 8 ft (2 sheets) | ☐ |
| Center divider | 1 | 3/4" × 15 3/4" × 56" | 3/4" plywood, ripped 15-3/4" strips, 8 ft (2 sheets) | ☐ |
| Bottom drawer trim | 4 | 3/4" × 1 1/2" × 44" | Pine 1x2 | ☐ |
| Center divider trim | 2 | 1 1/2" × 1 1/2" × 54 1/2" | Pine 2x2 | ☐ |
| Smaller drawer trim | 4 | 3/4" × 1 1/2" × 23 1/4" | Pine 1x2 | ☐ |
| Upper shelf | 1 | 3/4" × 15 3/4" × 23 1/4" | 3/4" plywood, ripped 15-3/4" strips, 8 ft (2 sheets) | ☐ |
| Top panel | 1 | 3/4" × 15 3/4" × 49" | 3/4" plywood, ripped 15-3/4" strips, 8 ft (2 sheets) | ☐ |
| Top trim, 1x2 | 1 | 3/4" × 1 1/2" × 49" | Pine 1x2 | ☐ |
| Top trim, 1x3 | 1 | 3/4" × 2 1/2" × 49" | Pine 1x3 | ☐ |
| Small drawer sides Build 3 small drawers total. | 6 | 3/4" × 7 1/4" × 16" | Pine 1x8 | ☐ |
| Small drawer front/back | 6 | 3/4" × 7 1/4" × 20 3/4" | Pine 1x8 | ☐ |
| Small drawer bottoms | 3 | 1/4" × 16" × 22 1/4" | 1/4" plywood or hardboard, 2 sheets | ☐ |
| Large drawer sides | 2 | 3/4" × 7 1/4" × 41 1/2" | Pine 1x8 | ☐ |
| Large drawer front/back | 2 | 3/4" × 7 1/4" × 16" | Pine 1x8 | ☐ |
| Large drawer bottom | 1 | 1/4" × 16" × 43" | 1/4" plywood or hardboard, 2 sheets | ☐ |
| Door stiles | 2 | 3/4" × 2 1/2" × 54 1/4" | Pine 1x3 | ☐ |
| Door top rails | 2 | 3/4" × 2 1/2" × 14" | Pine 1x3 | ☐ |
| Drawer face frame stiles | 2 | 3/4" × 2 1/2" × 23 1/2" | Pine 1x3 | ☐ |
| Drawer face frame rails | 2 | 3/4" × 2 1/2" × 18" | Pine 1x3 | ☐ |
| Small drawer face panels | 3 | 3/4" × 9 1/4" × 23" | Pine 1x10 | ☐ |
| Large drawer face panel | 1 | 3/4" × 9 1/4" × 43 3/4" | Pine 1x10 | ☐ |
| Door mirror backer panel | 1 | 1/4" × 19" × 54 1/4" | 1/4" plywood or hardboard, 2 sheets | ☐ |
| Small drawer face backer panel | 1 | 1/4" × 18" × 23 1/2" | 1/4" plywood or hardboard, 2 sheets | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, ripped 15-3/4" strips, 8 ft (2 sheets) Referred to as "1x16" throughout the plan. | 2 each | ☐ |
| 1/4" plywood or hardboard, 2 sheets Back and drawer bottoms. | 2 each | ☐ |
| Pine, 1x3, 8 ft | 3 each | ☐ |
| Pine, 2x2, 8 ft | 7 each | ☐ |
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Pine, 1x8, 8 ft | 4 each | ☐ |
| Pine, 1x10, 10 ft | 1 each | ☐ |
| 1-1/4" pocket hole screws | 1 box | ☐ |
| 2-1/2" pocket hole screws | 1 box | ☐ |
| 1-1/4" brad nails | 1 box | ☐ |
| 3/4" brad nails | 1 box | ☐ |
| Narrow profile hinges, pair | 2 set | ☐ |
| 16" Euro-style bottom corner mount drawer slides, pair | 4 pair | ☐ |
| Knobs or handles | 7 each | ☐ |
| Mirror, 49-1/4" x 14" | 1 each | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.