Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Angled Tabletop Plant Stand
This angled tabletop plant stand is perfect for adding some vertical height and greenery to your desk, mantel, side table or bar.
- Difficulty
- Easy
- Time
- 2.8–5.3 hours
- Cost
- $
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Base | 1 | 3/4" × 2" × 11" | — | ☐ |
| Trunk | 1 | 3/4" × 2" × 15" | — | ☐ |
| Low Branch | 1 | 3/4" × 2" × 8" | — | ☐ |
| High Branch | 1 | 3/4" × 2" × 10" | — | ☐ |
| Stump | 1 | 3/4" × 2" × 3" | — | ☐ |
| Platforms | 4 | 3/4" × 2" × 4" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x3 72" | 1 board | ☐ |
| Wood glue | 1 each | ☐ |
| Stain | 1 each | ☐ |
| 1 1/4" Kreg pocket screws | 8 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.