NotchLoading plan…
Loading plan…
This angled tabletop plant stand is perfect for adding some vertical height and greenery to your desk, mantel, side table or bar. The angled boards with greenery on top create the look of a "tree" and looks modern and fresh. Use these plans to build one yourself when you're stuck at home!
| Item | Qty |
|---|---|
| Board, 1x3 72" | 1 board |
| Wood glue | 1 each |
| Stain | 1 each |
| 1 1/4" Kreg pocket screws | 8 each |
Overall cost: $. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.
| Part | Qty | T × W × L |
|---|
| Base | 1 | 3/4" × 2" × 11" |
| Trunk | 1 | 3/4" × 2" × 15" |
| Low Branch | 1 | 3/4" × 2" × 8" |
| High Branch | 1 | 3/4" × 2" × 10" |
| Stump | 1 | 3/4" × 2" × 3" |
| Platforms | 4 | 3/4" × 2" × 4" |
Buy 1 board at 8 ft.
1 board
Assumes 8 ft stock, a 1/8" saw kerf, and buying each part at its own width. Change the board size or kerf on the full board plan →
Start by making all cuts according to the cut list. Then, make 30 degree miter cuts to the following: - Trunk- parallel cuts to make each side 14" - Low Branch- opposing cuts to make long edge 8" - High Branch- opposing cuts to make long edge 10" - Stump- parallel cuts to make each side 2"
Attach the Low Branch to the Trunk 2" from the end using pocket holes.
Attach the High Branch to the Trunk 3 1/2" up from the Low Branch using pocket holes.
Attach the Trunk with branches to the Base 3/4" from the edge and centered using pocket holes.
Attach the Stump to the Base on the other side, 2" in from the edge using pocket holes.
Stain and seal according to your decor style. Add small potted plants to finalize the "tree" look on your angled plant stand!
Check out www.CharlestonCrafted.com for more behind the scenes photos and more projects like this one!
No reviews yet
Sign in to review this plan or share your build.
No reviews yet. Be the first to build this.