NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An upholstered armless slipper chair on a 2x lumber frame — build the frame, upholster the seat and back separately, then bolt them together.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 1 1/2" × 10" | 2x2 | ☐ |
| Leg frame / support / seat box | 5 | 1 1/2" × 3 1/2" × 23" | 2x4 | ☐ |
| Leg frame sides | 2 | 1 1/2" × 3 1/2" × 26 1/2" | 2x4 | ☐ |
| Seat box front/back | 2 | 1 1/2" × 3 1/2" × 24 1/4" | 2x4 | ☐ |
| Seat support | 1 | 1 1/2" × 1 1/2" × 23" | 2x2 | ☐ |
| Back frame sides | 2 | 1 1/2" × 5 1/2" × 34" | 2x6 | ☐ |
| Back frame rails | 3 | 1 1/2" × 3 1/2" × 23" | 2x4 | ☐ |
| Back frame bottom Ripped to 5" wide. | 1 | 1 1/2" × 5" × 23" | 2x6 | ☐ |
| Back panel | 1 | 1/4" × 26" × 30 1/2" | 1/4" lauan or hardboard | ☐ |
| Seat panel | 1 | 1/4" × 23 3/4" × 26" | 1/4" lauan or hardboard | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x2 board, 6 ft (Pine) | 1 each | ☐ |
| 2x4 board, 8 ft (Pine) | 3 each | ☐ |
| 2x6 board, 8 ft (Pine) | 1 each | ☐ |
| 1/4" lauan or hardboard, half sheet Seat and back panels. | 1 each | ☐ |
| 4" carriage bolts with nuts | 4 each | ☐ |
| Fender washers | 8 each | ☐ |
| 5" upholstery foam Seat cushion. | 1 each | ☐ |
| 1" upholstery foam Back. | 1 each | ☐ |
| Upholstery batting | 2 yard | ☐ |
| Fabric | 3 yard | ☐ |
| Upholstery tacks / staples | 120 each | ☐ |
| Pocket-hole screws, 2-1/2" | 40 each | ☐ |
| Brad nails, 1-1/4" | 40 each | ☐ |
| Wood glue and spray adhesive | 12 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.