NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Two identical A-frame shelf pieces from a single 1x6 board — sit them at any distance apart to span whatever you're organizing, or add a third for extra reach.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tall leg | 2 | 3/4" × 5 1/2" × 16" | 1x6 | ☐ |
| Shelf Can be extended to 20" for a longer shelf. A 1x8 or 1x10 gives a deeper shelf. | 2 | 3/4" × 5 1/2" × 12" | 1x6 | ☐ |
| Short leg | 2 | 3/4" × 5 1/2" × 11" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6, 8 ft | 1 each | ☐ |
| Brad nails, 1-1/4" and glue, or self-tapping star bit screws, 1-3/4" | 12 each | ☐ |
| Wood stain or paint | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Drill / Driver, Tape Measure. Materials: 1x6, 8 ft, Brad nails, 1-1/4" and glue, or self-tapping star bit screws, 1-3/4"
Carefully mark the shelf location on both the tall leg and the short leg. Attach the shelf to both legs with nails or screws, three per joint. Build two identical organizer pieces.
Materials: Wood stain or paint
Position the two organizer pieces as far apart as needed for whatever they're organizing, and adjust as needed. For an even longer shelf, add a third organizer piece as a middle support. Sand and finish.