Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Angled Footstool for Adirondack Chair

A slatted outdoor ottoman angled to match an Adirondack chair's seat, so your legs land level. One 2x4, one 1x4, an hour.

Cut list

Part	Qty	T × W × L	Material	✓
Stringers Both ends cut 30° off square, parallel to each other, long point to short point.	2	1 1/2" × 3 1/2" × 23 1/2"	2x4	☐
Top slats	5	3/4" × 3 1/2" × 22 1/2"	1x4	☐
Legs One end cut 30° off square, longest-point measurement.	2	1 1/2" × 3 1/2" × 13 3/4"	2x4	☐

Item	Qty	✓
2x4, 8 ft (Cedar) Stringers and legs. Cedar or another rot-resistant species for outdoors. Stud length is fine.	1 each	☐
1x4, 12 ft (Cedar) Top slats.	1 each	☐
Exterior deck screws, 2" and 2-1/2" Self-tapping, exterior-rated.	1 box	☐

Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.