NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Curved back, sloped seat, cedar throughout. The angles are the whole design — cut the template right and the rest is assembly.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Rear legs / seat supports The curved part. Cut from the template. This piece defines the chair's whole geometry. | 2 | 1 1/2" × 3 1/2" × 36" | Cedar | ☐ |
| Front legs | 2 | 1 1/2" × 3 1/2" × 21" | Cedar | ☐ |
| Seat slats Spaced ~1/2" apart so rain drains through. | 6 | 3/4" × 3 1/2" × 22" | Cedar | ☐ |
| Back slats Cut to a fan curve at the top — tallest in the center. | 7 | 3/4" × 3 1/2" × 32" | Cedar | ☐ |
| Arms Wide enough to hold a drink. This is the single most appreciated feature of the chair. | 2 | 3/4" × 5 1/2" × 28" | Cedar | ☐ |
| Arm supports | 2 | 3/4" × 3 1/2" × 9" | Cedar | ☐ |
| Back braces | 2 | 3/4" × 3 1/2" × 22" | Cedar | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Cedar, 1x6, 8 ft (Western Red Cedar) Back slats, seat slats, arms. | 5 each | ☐ |
| Cedar, 2x4, 8 ft (Western Red Cedar) Legs and seat supports — the structural parts. | 2 each | ☐ |
| Cedar, 1x4, 6 ft (Western Red Cedar) | 1 each | ☐ |
| Stainless steel screws, #8 x 1-1/4" and 2" Stainless, not coated. Cedar's tannins eat plain steel and streak rust down the chair. | 60 each | ☐ |
| Waterproof wood glue | 4 oz | ☐ |
| Hardboard for template | 1 each | ☐ |
| Exterior finish or leave raw Optional. Raw cedar silvers to grey and lasts fine. Finish means re-finishing, forever. | 16 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.