NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A two-story A-frame dollhouse with a hinged roof side that folds open for play, cut from plywood with a jigsaw.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| A-frame sides Cut into the triangular A-frame profile; keep the 3/4" edges and second-floor horizontal piece intact. | 2 | 3/4" × 15 1/2" × 17" | Plywood | ☐ |
| Loft floor / roof trim | 1 | 3/4" × 1 1/2" × 18 1/2" | Pine, 1x3 | ☐ |
| Bottom | 1 | 3/4" × 8 1/4" × 18 1/2" | Plywood, 3/4" | ☐ |
| Side panels | 2 | 1/4" × 18 5/8" × 22" | Plywood, 1/4" | ☐ |
| Roof panel, hinged | 1 | 1/4" × 22" × 16" | Plywood, 1/4" | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 1/4", 24" x 48" | 1 each | ☐ |
| Plywood, 3/4", 18-1/2" x 24" | 1 each | ☐ |
| Pine, 1x3, 18-1/2 in Use 1x3, not 1x2 — the extra width lets the hinged roof side close without binding. | 1 each | ☐ |
| Small hinges Hangs one roof side to swing open. | 1 set | ☐ |
| Brad nails, 3/4" and 1-1/4" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.