NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An open-back bathroom vanity built around purchased turned legs, with a notched plywood shelf and pocket-holed face frames sized to your sink.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg end trim Cut to fit your actual legs. | 4 | 3/4" × 2 1/2" × 15" | Pine 1x3 | ☐ |
| Leg end panel | 1 | 3/4" × 19" × 15" | Plywood | ☐ |
| Face frame stiles Cut to fit your legs and vanity top. | 4 | 3/4" × 2 1/2" × 42" | Pine 1x3 | ☐ |
| Face frame rails | 4 | 3/4" × 1 1/2" × 14" | Pine 1x2 | ☐ |
| Bottom shelf trim Cut to fit distance between the legs' stretcher blocks. | 2 | 3/4" × 1 1/2" × 15" | Pine 1x2 | ☐ |
| Bottom shelf trim, front/back Cut to fit. | 2 | 3/4" × 1 1/2" × 42" | Pine 1x2 | ☐ |
| Bottom shelf panel Notched to fit around the turned legs. | 1 | 3/4" × 15" × 42" | Plywood | ☐ |
| Interior partitions Optional; sized to your storage layout. | 2 | 3/4" × 15" × 30" | Plywood scrap | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Turned vanity legs, with bottom stretcher block Buy first — every other measurement is taken from these. | 4 each | ☐ |
| Pine, 1x3, 8 ft | 3 each | ☐ |
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Plywood, 3/4", half sheet Leg-end panel and bottom shelf. | 1 each | ☐ |
| Plywood, 3/4", scrap Optional interior partitions. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Sandpaper, assorted grit | 3 sheet | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.