NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A plywood console with three center-mount drawers above open shelving — a distinct layout from this catalog's other consoles, which pair open shelves with cabinet doors instead.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top | 1 | 3/4" × 15 3/4" × 46 1/2" | 3/4" plywood, full sheets (ripped to 15-3/4" and 14-1/4" strips) | ☐ |
| Sides | 2 | 3/4" × 15 3/4" × 35 1/4" | 3/4" plywood, full sheets (ripped to 15-3/4" and 14-1/4" strips) | ☐ |
| Bottom | 1 | 3/4" × 15 3/4" × 45" | 3/4" plywood, full sheets (ripped to 15-3/4" and 14-1/4" strips) | ☐ |
| Back support | 1 | 3/4" × 3 1/2" × 45" | 1x4, 8 ft | ☐ |
| Face frame stiles | 3 | 3/4" × 1 1/2" × 45" | 1x2, 8 ft | ☐ |
| Face frame side rails | 2 | 3/4" × 1 1/2" × 5 3/4" | 1x2, 8 ft | ☐ |
| Face frame end rails | 2 | 3/4" × 1 1/2" × 15 3/4" | 1x2, 8 ft | ☐ |
| Top edge trim | 1 | 3/4" × 1 1/2" × 48" | 1x2, 8 ft | ☐ |
| Side trim | 2 | 3/4" × 3 1/2" × 15 3/4" | 1x4, 8 ft | ☐ |
| Front trim slide support | 1 | 3/4" × 3 1/2" × 48" | 1x4, 8 ft | ☐ |
| Back panel | 1 | 1/4" × 46 1/2" × 36" | 1/4" plywood or paneling, for back | ☐ |
| Drawer sides | 6 | 3/4" × 3 1/2" × 12" | 1x4, 8 ft | ☐ |
| Drawer front/back | 6 | 3/4" × 3 1/2" × 12 1/2" | 1x4, 8 ft | ☐ |
| Drawer faces Cut to fit. | 3 | 3/4" × 5 1/2" × 13 3/4" | 1x6, 4 ft | ☐ |
| Drawer bottoms | 3 | 1/4" × 13 1/2" × 12 1/2" | 1/4" plywood or paneling, for back | ☐ |
| Shelves | 2 | 3/4" × 14 1/4" × 45" | 3/4" plywood, full sheets (ripped to 15-3/4" and 14-1/4" strips) | ☐ |
| Shelf trim | 4 | 3/4" × 1 1/2" × 45" | 1x2, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, full sheets (ripped to 15-3/4" and 14-1/4" strips) | 2 each | ☐ |
| 1/4" plywood or paneling, for back | 1 each | ☐ |
| 1x2, 8 ft | 5 each | ☐ |
| 1x4, 8 ft | 4 each | ☐ |
| 1x6, 4 ft | 1 each | ☐ |
| Edge banding | 20 ft | ☐ |
| Bottom center mount drawer slides, 13 in | 3 each | ☐ |
| Pocket hole screws, 1-1/4" | 120 each | ☐ |
| Brad nails, 1-1/4" and 3/4" | 100 each | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.