NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An open gable-roof frame built entirely from 2x2s — no walls or panels, just the skeleton of a little house that a kid (and a draped sheet or fabric) can turn into a playhouse.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Gable peak connectors | 2 | 1 1/2" × 1 1/2" × 37" | Pine | ☐ |
| Gable rafters Longest point measurement, one end cut at 30° off square. | 4 | 1 1/2" × 1 1/2" × 44" | Pine | ☐ |
| Gable side walls Both ends cut parallel at 30° off square, long point to short point measurement. | 4 | 1 1/2" × 1 1/2" × 23 1/8" | Pine | ☐ |
| Long frame connectors | 5 | 1 1/2" × 1 1/2" × 48" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x2, 8 ft | 8 each | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Finish nails, 2" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.