NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An 18"-wide base cabinet built around three stacked drawers, with mirrored side panels, a separately built face frame, and full-overlay drawer faces.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side panels Cut as true mirror images; pocket holes go on the outside of both. | 2 | 3/4" × 22 1/4" × 34 1/2" | Plywood, 3/4" | ☐ |
| Bottom shelf | 1 | 3/4" × 22 1/4" × 16" | Plywood, 3/4" | ☐ |
| Bottom supports | 2 | 3/4" × 5" × 16" | Plywood, 3/4" | ☐ |
| Top supports Width can vary somewhat. | 2 | 3/4" × 3 1/2" × 16" | Plywood, 3/4" | ☐ |
| Back | 1 | 1/4" × 17 1/2" × 32" | Plywood, 1/4" | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 27" | Pine 1x2 | ☐ |
| Face frame top/mid rails | 2 | 3/4" × 1 1/2" × 18" | Pine 1x2 | ☐ |
| Face frame bottom rail | 2 | 3/4" × 1 1/2" × 15" | Pine 1x2 | ☐ |
| Small drawer face | 1 | 3/4" × 5 1/2" × 17 1/2" | Drawer/door face material | ☐ |
| Large drawer faces | 2 | 3/4" × 11" × 17 1/2" | Drawer/door face material | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet Ripped into 22-1/4" strips for sides/shelf, 5" strips for base supports, and scrap for top supports. | 1 each | ☐ |
| Plywood, 1/4", for back | 1 each | ☐ |
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Finish nails, 3/4" | 1 box | ☐ |
| Drawer slide sets, 21-1/2" to 22-1/4" interior length | 3 set | ☐ |
| Drawer/door face material, 3/4" plywood or MDF Cut into one small and two large full-overlay faces. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.