Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

X Bench (Works with X Outdoor Table)

A backless X-leg bench sized to pair with the matching X outdoor table. All 30° cuts — every leg piece is angled.

Cut list

Part	Qty	T × W × L	Material	✓
Long leg pieces Both ends 30° off square, ends parallel.	6	3/4" × 2 1/2" × 19 1/4"	1x3	☐
Short leg pieces (A) Long point to long point; both ends 30° off square, NOT parallel.	6	3/4" × 2 1/2" × 9 1/4"	1x3	☐
Short leg pieces (B) Long point to long point; both ends 30° off square, NOT parallel.	6	3/4" × 2 1/2" × 9 7/8"	1x3	☐
Top blocks Long point to long point; both ends 30° off square, NOT parallel.	6	1 1/2" × 1 1/2" × 12 3/8"	2x2	☐
Seat boards (2x4)	2	1 1/2" × 3 1/2" × 64"	2x4	☐
Seat board (2x6)	1	1 1/2" × 5 1/2" × 64"	2x6	☐

Item	Qty	✓
1x3, 8 ft (Cedar or pressure-treated) X leg pieces.	3 each	☐
2x2, 8 ft (Cedar or pressure-treated) Top blocks.	2 each	☐
2x4, 8 ft (Cedar or pressure-treated) Seat boards.	2 each	☐
2x6, 8 ft (Cedar or pressure-treated) Center seat board.	1 each	☐
Exterior screws, 1-1/4" and 2-1/2"	40 each	☐
Waterproof wood glue	4 oz	☐

Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.