Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Workshop Table Saw Storage Cabinet
Every workshop needs more storage.
- Difficulty
- Intermediate
- Time
- 6.8–13.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Door Front | 1 | 3/4" × 13" × 23" | — | ☐ |
| Drawer Front | 1 | 3/4" × 7" × 22" | — | ☐ |
| Drawer Front | 1 | 3/4" × 5" × 22" | — | ☐ |
| Drawer Front | 1 | 3/4" × 4" × 22" | — | ☐ |
| Drawer Front | 1 | 3/4" × 4" × 22" | — | ☐ |
| Front Apron | 1 | 3/4" × 2" × 34" | — | ☐ |
| Drawer Sides | 2 | 3/4" × 6" × 23" | — | ☐ |
| Drawer Sides | 2 | 3/4" × 5" × 23" | — | ☐ |
| Drawer Sides | 2 | 3/4" × 4" × 23" | — | ☐ |
| Drawer Sides | 2 | 3/4" × 3" × 23" | — | ☐ |
| Drawer Back | 1 | 3/4" × 5" × 19" | — | ☐ |
| Drawer Back | 1 | 3/4" × 6" × 19" | — | ☐ |
| Drawer Back | 1 | 3/4" × 4" × 19" | — | ☐ |
| Drawer Back | 1 | 3/4" × 3" × 19" | — | ☐ |
| Drawer Bottoms | 4 | 3/4" × 20" × 23" | — | ☐ |
| Cabinet Bottom | 1 | 3/4" × 23" × 34" | — | ☐ |
| Cabinet Back | 1 | 3/4" × 25" × 34" | — | ☐ |
| Cabinet Sides | 2 | 3/4" × 24" × 25" | — | ☐ |
| Cabinet Divider | 1 | 3/4" × 22" × 23" | — | ☐ |
| Cabinet Top | 1 | 3/4" × 26" × 37" | — | ☐ |
| Drawer Glides - Oak | 6 | 3/4" × 3/4" × 23" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 2 board | ☐ |
| Plywood, 3/4" Thick Half Sheet | 1 board | ☐ |
| 3/4" Oak, 1x4 48" | 1 board | ☐ |
| Ferrari Hinges H91081AGGWS | 2 each | ☐ |
| Kreg 1 1/4" Coarse Pocket Hole Screws | 175 each | ☐ |
| 3" Casters | 4 each | ☐ |
| Minwax Polycrylic Finish | 1 each | ☐ |
| Optional Edge Banding | 1 each | ☐ |
| Titebond I Woodglue | 1 each | ☐ |
| 100 - 220 grit sandpaper | 8 each | ☐ |
| Drawer Pulls | 4 each | ☐ |
| Door Pull | 1 each | ☐ |
| 1 1/4" brad nails | 50 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.