Workbench to Get the Job Done — board plan

1 1/2" × 3 1/2" — Pine 2x4

7 boards · 25.9 board feet (includes 15% for knots and defects) · 93% of the boards you buy used

1. Board 1 · 1 3/4" left over

   60"33"
   1. Top end rails — 60"
   2. Legs — 33"

2. Board 2 · 1 3/4" left over

   60"33"
   1. Top end rails — 60"
   2. Legs — 33"

3. Board 3 · 4 3/4" left over

   57"33"
   1. Long stretchers — 57"
   2. Legs — 33"

4. Board 4 · 4 3/4" left over

   57"33"
   1. Long stretchers — 57"
   2. Legs — 33"

5. Board 5 · 1 7/8" left over

   21"21"21"21"8 1/2"
   1. Under-top supports — 21"
   2. Under-top supports — 21"
   3. Under-top supports — 21"
   4. Under-top supports — 21"
   5. Corner feet blocks — 8 1/2"

6. Board 6 · 5 3/8" left over

   21"21"21"17 1/2"8 1/2"
   1. Under-top supports — 21"
   2. Under-top supports — 21"
   3. Under-top supports — 21"
   4. Lower shelf stretchers — 17 1/2"
   5. Corner feet blocks — 8 1/2"

7. Board 7 · 24 7/8" left over

   17 1/2"17 1/2"17 1/2"8 1/2"8 1/2"
   1. Lower shelf stretchers — 17 1/2"
   2. Lower shelf stretchers — 17 1/2"
   3. Lower shelf stretchers — 17 1/2"
   4. Corner feet blocks — 8 1/2"
   5. Corner feet blocks — 8 1/2"

3/4" × 24" — Plywood, 3/4"

0 boards · 27.6 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

• Shelf and top panels at 96" — Longer than a 96″ board once the end trim is taken off.
• Shelf and top panels at 96" — Longer than a 96″ board once the end trim is taken off.