NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A five-pointed star built from compound-angle 1x2 segments backed with plywood, usable flat as a serving tray or hung as wall decor.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Star point boards Both ends cut at a 30° bevel, ends parallel. Each board is further cut in two at a 24° bevel to form the star's 10 point segments. | 5 | 3/4" × 1 1/2" × 13" | Pine, 1x2, 6 ft | ☐ |
| Backer panel Traced from the assembled star and cut to fit; 19" x 19" is a starting size. | 1 | 1/4" × 19" × 19" | 1/4" plywood, 19 in x 19 in | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x2, 6 ft | 1 each | ☐ |
| 1/4" plywood, 19 in x 19 in | 1 each | ☐ |
| 1-1/4" and 3/4" brad nails | 1 box | ☐ |
| Wood glue | 1 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.