NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A backyard seesaw with a bolt pivot, dowel handles, and padded seats — plus three pivot heights, so it grows with the kids instead of aging out.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Beam boards | 2 | 1 1/2" × 3 1/2" × 96" | — | ☐ |
| Uprights Drilled at three heights for the adjustable pivot. | 2 | 1 1/2" × 5 1/2" × 24" | 2x6 | ☐ |
| Long base | 2 | 1 1/2" × 5 1/2" × 36" | 2x6 | ☐ |
| Short base Both ends 30° off square, NOT parallel — the splayed feet. | 2 | 1 1/2" × 5 1/2" × 24" | 2x6 | ☐ |
| Handle supports Shorter scrap works. | 2 | 1 1/2" × 5 1/2" × 12" | 2x6 | ☐ |
| Seats | 2 | 3/4" × 7 1/4" × 15" | 1x8 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft The laminated beam. | 2 each | ☐ |
| 2x6, 8 ft Uprights, base, and handle supports — cut one of each length from each board to conserve stock. | 2 each | ☐ |
| 1x8, 3 ft The two seats. Scrap works. | 1 each | ☐ |
| Bolt, 5/8" x 10", with nut and four washers The pivot. Washers on BOTH sides of each upright — steel bears on steel, not wood. | 1 each | ☐ |
| Dowel, 1", 24" Closet rod — the two handles. | 1 each | ☐ |
| Exterior screws, #9 x 2-1/2", self-tapping | 50 each | ☐ |
| Exterior wood glue | 8 oz | ☐ |
| Foam chair pad and outdoor fabric One pad, cut in half — two seats. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.