NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A divided utensil caddy from a single cedar fence picket — seven small cuts, glue and brads, done in an hour. The definitive scrap-picket project.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides and bottom | 3 | 5/8" × 5 1/2" × 16 1/2" | Cedar fence picket | ☐ |
| Dividers Nominal — measure the assembled caddy's inside width and cut to fit. Picket thickness varies too much to trust the math. | 4 | 5/8" × 5 1/2" × 4 1/2" | Cedar fence picket | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Cedar fence picket, 5-1/2" x 72" (Cedar) The whole project. Dog-eared is fine — the clipped end becomes scrap. | 1 each | ☐ |
| Brad nails, 1-1/4" | 30 each | ☐ |
| Wood glue | 2 oz | ☐ |
| Paint or stain A foam applicator brush is the only equipment needed. | 8 oz | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.