Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Wine Cabinet
Store your wine in style!
- Difficulty
- Intermediate
- Time
- 7.5–14.5 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cabinet Top | 1 | 3/4" × 14" × 16" | — | ☐ |
| Shelf | 1 | 3/4" × 14" × 16" | — | ☐ |
| Bottom | 1 | 3/4" × 14" × 16" | — | ☐ |
| Side | 2 | 3/4" × 14" × 35" | — | ☐ |
| Side | 2 | 3/4" × 14" × 35" | — | ☐ |
| Vertical Divider | 2 | 3/4" × 14" × 17" | — | ☐ |
| Horizontal Divider | 2 | 3/4" × 12" × 14" | — | ☐ |
| Finished Top | 1 | 3/4" × 14" × 19" | — | ☐ |
| Back | 1 | 1/4" × 17" × 23" | — | ☐ |
| Wide Leg | 4 | 3/4" × 3" × 5" | — | ☐ |
| Narrow Leg | 4 | 3/4" × 2" × 5" | — | ☐ |
| Base Front Rail | 1 | 3/4" × 2" × 11" | — | ☐ |
| Base Back Rail | 1 | 3/4" × 2" × 11" | — | ☐ |
| Base Side Rail | 2 | 3/4" × 2" × 7" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Plywood, 1/4" Thick Quarter Sheet | 1 board | ☐ |
| Board, 1x3 72" | 1 board | ☐ |
| Board, 1x4 24" | 1 board | ☐ |
| 1 1/4" coarse-thread Kreg pocket-hole screws | 1 each | ☐ |
| 1 1/4" fine-thread Kreg pocket-hole screws | 1 each | ☐ |
| 25' roll oak iron-on veneer edge banding | 2 each | ☐ |
| Edge banding trimmer | 1 each | ☐ |
| Wood glue | 1 each | ☐ |
| Countersink drill bit | 1 each | ☐ |
| Right angle drill attachment | 1 each | ☐ |
| 2-pack wine glass holders | 1 each | ☐ |
| 1 1/4" flat-head wood screws | 4 each | ☐ |
| #6 x 5/8" pan-head wood screw | 12 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.