NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A big pine console with mitered corners that carry the top's line straight down the sides — the 'waterfall' look — over two open shelf bays.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top Both ends beveled 45°, ends not parallel — a long parallelogram, not a rectangle. This is the waterfall piece. | 1 | 3/4" × 11 1/4" × 84" | Pine 1x12 | ☐ |
| Sides One end beveled 45° to mate with the top's miter. | 2 | 3/4" × 11 1/4" × 30" | Pine 1x12 | ☐ |
| Bottom shelf | 1 | 3/4" × 11 1/4" × 82 1/2" | Pine 1x12 | ☐ |
| Center dividers Two boards form each of the two vertical dividers. | 4 | 3/4" × 11 1/4" × 26 3/4" | Pine 1x12 | ☐ |
| Side blocking Hidden bracing on the insides of the side panels. | 4 | 3/4" × 1 1/2" × 11 1/4" | Pine 1x2 | ☐ |
| Face frame long rails Mitered 45° both ends, long point to long point, ends not parallel. Two for the front frame, two for the back. | 4 | 3/4" × 2 1/2" × 84" | Pine 1x3 | ☐ |
| Face frame short rails Mitered to match the long rails. | 4 | 3/4" × 2 1/2" × 30" | Pine 1x3 | ☐ |
| Center divider face frame | 2 | 3/4" × 2 1/2" × 25" | Pine 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x12, 10 ft Top, sides, bottom shelf, and dividers — pick straight boards with minimal cupping; a bow shows badly right at a mitered corner. | 3 each | ☐ |
| Pine, 1x3, 10 ft Front and back face frames. | 4 each | ☐ |
| Pine, 1x3, 6 ft Center divider face frame. | 1 each | ☐ |
| Pine, 1x2, 4 ft Hidden interior blocking — scrap or furring strip is fine, it never shows. | 1 each | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 8 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.