Skip to content
Notch
← Back to the plan

Wall Mounted Wine Bar — board plan

What to buy, and which parts come off which board.

Buy 7 boards at 8 ft.

3/4" × 5 5/8"

1 board · 0.4 board feet (includes 15% for knots and defects) · 14% of each board consumed

  1. Board 1 · 82 1/4" left over

    1. Middle Upright — 6 1/4"
    2. Middle Upright — 6 1/4"

3/4" × 4 1/2"

1 board · 1.3 board feet (includes 15% for knots and defects) · 51% of each board consumed

  1. Board 1 · 47 1/2" left over

    1. Bottle Holder Bottom — 9 3/8"
    2. Bottle Holder Bottom — 9 3/8"
    3. Bottle Holder Bottom — 9 3/8"
    4. Bottle Holder Bottom — 9 3/8"
    5. Bottle Holder Bottom — 9 3/8"

3/4" × 3 3/4"

1 board · 0.7 board feet (includes 15% for knots and defects) · 33% of each board consumed

  1. Board 1 · 64 1/2" left over

    1. Bottle/Glass Holder Front — 9 3/8"
    2. Bottle/Glass Holder Front — 9 3/8"
    3. Bottle/Glass Holder Side — 5 5/8"
    4. Bottle/Glass Holder Side — 5 5/8"

3/4" × 3 1/2"

2 boards · 2.9 board feet (includes 15% for knots and defects) · 73% of each board consumed

  1. Board 1 · 3 1/2" left over

    1. Back — 22 3/4"
    2. Back — 22 3/4"
    3. Back — 22 3/4"
    4. Back — 22 3/4"

  2. Board 2 · 49 1/4" left over

    1. Back — 22 3/4"
    2. Back — 22 3/4"

3/4" × 2 1/2"

1 board · 0.8 board feet (includes 15% for knots and defects) · 55% of each board consumed

  1. Board 1 · 43 1/2" left over

    1. Bottle Holder Front — 9 3/8"
    2. Bottle Holder Front — 9 3/8"
    3. Bottle Holder Front — 9 3/8"
    4. Bottle Holder Side — 5 5/8"
    5. Bottle Holder Side — 5 5/8"
    6. Bottle Holder Side — 5 5/8"
    7. Bottle Holder Side — 5 5/8"

3/4" × 1 7/8"

1 board · 0.4 board feet (includes 15% for knots and defects) · 41% of each board consumed

  1. Board 1 · 57" left over

    1. Glass Holder — 9 3/8"
    2. Glass Holder — 9 3/8"
    3. Glass Holder — 9 3/8"
    4. Glass Holder — 9 3/8"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.