NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A gravity-fed FIFO can rack for the pantry wall — 15° sloped shelves roll cans forward behind an acrylic face, loaded from the top, oldest can always in front.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Top and bottom rails | 2 | 3/4" × 2 1/2" × 22 1/2" | 1x3 | ☐ |
| Sides One end 15° off square, long point. | 2 | 3/4" × 2 1/2" × 27 3/4" | 1x3 | ☐ |
| Dividers One end 15°, long point — the lane walls. | 3 | 3/4" × 2 1/2" × 26 1/8" | 1x3 | ☐ |
| Back supports The hanging rails — glued and screwed into the bottom rail especially. | 2 | 3/4" × 2 1/2" × 24" | 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Acrylic sheet, 18" x 24" The see-through face. 1x2s and 1x3s substitute for a all-wood version. | 1 each | ☐ |
| 1x3, 8 ft The entire frame. | 3 each | ☐ |
| Self-tapping wood screws, 2" | 50 each | ☐ |
| Wood screws, 1-1/4", flat-bottomed head Acrylic mounting — flat under the head, or the head's cone cracks the sheet. Pocket-hole screws qualify. | 15 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Wood screws, 3" Into studs. Fifty pounds of cans says so. | 4 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.