NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A lightweight 24"-wide wall cabinet carcass built from ripped plywood sides and 1x2 rails rather than full top and bottom panels, with adjustable shelf pins and a simple face frame.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides 30" is a standard cabinet height — adjust to taste. | 2 | 3/4" × 11 3/4" × 30" | Hardwood plywood, ripped to 11-3/4" | ☐ |
| Shelves, top and bottom rails Cabinet width (24") minus 2". | 2 | 3/4" × 1 1/2" × 22" | Pine 1x2 | ☐ |
| Adjustable shelf, optional Trim about 1/4" narrower for easy placement on shelf pins. | 1 | 3/4" × 11 3/4" × 22" | Hardwood plywood, ripped to 11-3/4" | ☐ |
| Top cleat | 1 | 3/4" × 1 1/2" × 22" | Pine 1x2 | ☐ |
| Back | 1 | 1/4" × 23 1/2" × 30" | Plywood, 1/4" | ☐ |
| Face frame stiles | 2 | 3/4" × 1 1/2" × 30" | Pine 1x2 | ☐ |
| Face frame rails Cabinet width (24") minus 3". | 2 | 3/4" × 1 1/2" × 21" | Pine 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Hardwood plywood, 3/4", ripped to 11-3/4" strips, 4x8 sheet One sheet yields far more strip length than this single cabinet needs — the cost reflects buying the whole sheet. | 1 each | ☐ |
| Plywood, 1/4", for back | 1 each | ☐ |
| Pine, 1x2, 8 ft | 2 each | ☐ |
| Pocket hole screws, 1-1/4", fine-thread for hardwood | 1 box | ☐ |
| Shelf pins, with shelf-pin jig | 4 each | ☐ |
| Edge banding, matching veneer | 1 roll | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.