NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-mounted shelf that holds three dry-erase calendar panels side by side — swap which month faces out as the year moves.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Shelf boards | 3 | 3/4" × 5 1/2" × 48" | Pine 1x6 | ☐ |
| Dividers | 2 | 3/4" × 2 1/2" × 15 1/2" | Pine 1x3 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x6, 8 ft Shelf and back boards. | 2 each | ☐ |
| Pine, 1x3, 4 ft Dividers. | 1 each | ☐ |
| 14" x 14" dry-erase calendar insert | 3 each | ☐ |
| Self-tapping screws, 1-1/2" | 1 box | ☐ |
| Heavy-duty picture-hanging bracket and wall anchor Or screw directly into studs if they line up. | 1 each | ☐ |
| Sandpaper, 120 grit | 1 each | ☐ |
| Paint or stain Optional finish. | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Pencil, Speed Square, Tape Measure
On one of the 1x6 boards, mark the side edges at 1-5/8", 17-1/8", and 32-3/8" from one end — these are your divider centerlines. On all three 1x3 dividers, mark 4-3/4" inward from both cut ends along the edge.
Tools: Drill / Driver, Speed Square. Materials: Pine, 1x6, 8 ft, Pine, 1x3, 4 ft, Self-tapping screws, 1-1/2"
Place the three 1x3 dividers on edge on a flat, level surface. Lay the marked 1x6 on top at your layout lines and screw down, two screws per shelf joint. Check each divider is perpendicular to the shelf board with a speed square as you go — this is what keeps the slots even.
Tools: Drill / Driver. Materials: Pine, 1x6, 8 ft, Self-tapping screws, 1-1/2"
Place the remaining 1x6 boards on the back of the assembly and mark screw locations at each divider joint. Screw the back boards on with two screws per joint.
Tools: Level. Materials: 14" x 14" dry-erase calendar insert, Heavy-duty picture-hanging bracket and wall anchor, Sandpaper, 120 grit, Paint or stain
Sand any rough edges, apply paint or stain if you're finishing it, then hang on the wall with the picture-hanging bracket — level it before you commit to the final screw holes. Slide the three calendar panels into their slots.