NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A dining table with a storage box built into the base and a single drawer, topped with a big 50x36 top. Shaped plywood ends give it the vintage look.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Storage box sides | 2 | 3/4" × 19" × 29 1/2" | 3/4 in plywood | ☐ |
| Drawer guide blocks (1x6) | 4 | 3/4" × 5 1/2" × 5 3/4" | 1x6 | ☐ |
| Drawer guides (1x2) | 2 | 3/4" × 1 1/2" × 17 1/2" | 1x2 | ☐ |
| Shaped ends Draw your own pattern; template the pair to match. | 2 | 3/4" × 22" × 27" | 3/4 in plywood | ☐ |
| Box top/bottom (1x6) | 2 | 3/4" × 5 1/2" × 36" | 1x6 | ☐ |
| Top supports (2x2) Round the edges. | 2 | 1 1/2" × 1 1/2" × 36" | 2x2 | ☐ |
| Tabletop Planked hardwood or trimmed plywood. | 1 | 3/4" × 36" × 50" | tabletop | ☐ |
| Drawer front/back (1x4) | 2 | 3/4" × 3 1/2" × 17 1/2" | 1x4 | ☐ |
| Drawer sides (1x4) | 2 | 3/4" × 3 1/2" × 16 3/4" | 1x4 | ☐ |
| Drawer bottom | 1 | 1/4" × 17 1/2" × 18 1/4" | 1/4 in plywood | ☐ |
| Drawer face | 1 | 3/4" × 5 1/2" × 18 1/4" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4 in, 4x8 sheet Ripped into 19", 22", and 5-1/2" strips for the base. | 1 each | ☐ |
| 1x2, 4 ft Drawer guides / edge frame. | 1 each | ☐ |
| 2x2, 6 ft Top supports. | 1 each | ☐ |
| 1x4, 6 ft Drawer box. | 1 each | ☐ |
| 1x6 (base parts) | 1 board | ☐ |
| Tabletop, 50 in x 36 in Planked hardwood, or plywood trimmed/edge-banded. | 1 each | ☐ |
| Plywood, 1/4 in (drawer bottom) | 1 each | ☐ |
| Knobs or handles | 2 each | ☐ |
| Wood screws, 2 in | 1 box | ☐ |
| Pocket-hole screws, 1-1/4 in | 1 box | ☐ |
| Finish nails, 1-1/4 in | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
| Finish | 1 quart | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.