NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A church-pew-style bench with a slide-out drawer hidden in the seat and a decorative mirrored-end design — built as two matching end assemblies joined into one bench.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End panels | 2 | 3/4" × 11 1/4" × 32 1/4" | Pine 1x12 | ☐ |
| End decorative caps | 2 | 3/4" × 3 1/2" × 11 1/4" | Pine 1x4 | ☐ |
| End decorative trim | 2 | 3/4" × 5 1/2" × 11 1/4" | Pine 1x6 | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 36" | Pine 2x2 | ☐ |
| Leg braces | 2 | 1 1/2" × 1 1/2" × 5 1/4" | Pine 2x2 | ☐ |
| Front decorative trim | 2 | 3/4" × 2 1/2" × 16 1/4" | Pine 1x3 | ☐ |
| Back top rail | 1 | 3/4" × 1 1/2" × 35" | Pine 1x2 | ☐ |
| Back supports | 2 | 1 1/2" × 3 1/2" × 36" | Pine 2x4 | ☐ |
| Back bottom and front support | 2 | 1 1/2" × 1 1/2" × 36" | Pine 2x2 | ☐ |
| Front apron | 1 | 3/4" × 5 1/2" × 36" | Pine 1x6 | ☐ |
| Drawer slides (wood) | 2 | 3/4" × 1 1/2" × 12" | Pine 1x2 | ☐ |
| Seat trim, front | 1 | 3/4" × 1 1/2" × 36" | Pine 1x2 | ☐ |
| Seat panel | 1 | 3/4" × 11 1/4" × 36" | Pine 1x12 | ☐ |
| Seat back trim | 1 | 3/4" × 2 1/2" × 36" | Pine 1x3 | ☐ |
| Back panel | 1 | 1/4" × 33 1/4" × 39" | 1/4" plywood | ☐ |
| Drawer sides | 2 | 3/4" × 5 1/2" × 11 1/2" | Pine 1x6 | ☐ |
| Drawer front and back | 2 | 3/4" × 5 1/2" × 34 1/4" | Pine 1x6 | ☐ |
| Drawer bottom | 1 | 1/4" × 35 3/4" × 11 1/2" | 1/4" plywood | ☐ |
| Drawer face | 1 | 3/4" × 7 1/4" × 35 3/4" | Pine 1x8 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x12, 10 ft | 1 each | ☐ |
| Pine, 1x4, 2 ft | 1 each | ☐ |
| Pine, 1x2, 8 ft | 1 each | ☐ |
| Pine, 1x6, 8 ft | 2 each | ☐ |
| Pine, 2x2, 8 ft | 3 each | ☐ |
| Pine, 1x3, 4 ft | 1 each | ☐ |
| Pine, 2x4, 8 ft | 1 each | ☐ |
| Pine, 1x8, 3 ft | 1 each | ☐ |
| Plywood, 1/4", 4x8 sheet | 1 each | ☐ |
| Quarter round moulding, 8 ft | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Brad nails, 2" | 1 box | ☐ |
| Wood glue | 5 oz | ☐ |
| Drawer pull | 1 each | ☐ |
| Sandpaper, assorted grit | 4 sheet | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.